1. Application:
The equipment is mainly used for continuous vulcanization of rubber wire production; it can produce single-core wire, double core wire, double layers wire, double parallel wire, etc.
2. Main specifications:
1 Suitable cable types: rubber single core wire, double parallel wires and double insulation and coating, extrusion injection wire.
2 Extrusion material: silicon runner, CPE, EPDM, EPR, CR, CSM, EVA (flake), 100% plasticization percentage
3 Core Range:. 0.5m ~ 2.5m square meters single.
4 Product specifications: flat line 1.5mm × 3.0mm ~ 3.9mm × 7.8mm, round wire Φ1.5mm ~ 10mm.
5 Maximum line speed:. 160m/min.
6 Vapor Pressure:. 25kg / cm2
7 Center height: 1050mm.
8 The total length of vulcanization: 102m.
9 Operating direction: right/left hand (face to head from to operate, per customer’s needs).
10 Machine Color: whole appearance 1. □ apple.2 □ dull blue; safety colors: yellow; electrical box looks, □ as the whole machine, □ gray corrugated paint.
3. main components:
1 Flying pay-off:
2 Pay-off tension frame:
3 Talc powder machine
4 Taping machine:
5 Main part: Φ65 + Φ65
6 Φ65 main Extruder:
7 Φ65 optional Extruder:
8 articulation box:
9 pressure vulcanization device:
10 Flashback tank:
11 capstan:
12 printer:
13 cooling tank:
14 oil soaking device:
15 Accumulator (metering included):
16 double-shaft take-up:
17 frequency spark tester:
18 Laser diameter gauge:
19 water control system:
20 Electrical control system:
21 Temperature control system: